'''
TUIO Input Provider
===================
TUIO is the de facto standard network protocol for the transmission of
touch and fiducial information between a server and a client. To learn
more about TUIO (which is itself based on the OSC protocol), please
refer to http://tuio.org -- The specification should be of special
interest.
Configure a TUIO provider in the config.ini
-------------------------------------------
The TUIO provider can be configured in the configuration file in the
``[input]`` section::
[input]
# name = tuio,<ip>:<port>
multitouchtable = tuio,192.168.0.1:3333
Configure a TUIO provider in the App
------------------------------------
You must add the provider before your application is run, like this::
from kivy.app import App
from kivy.config import Config
class TestApp(App):
def build(self):
Config.set('input', 'multitouchscreen1', 'tuio,0.0.0.0:3333')
# You can also add a second TUIO listener
# Config.set('input', 'source2', 'tuio,0.0.0.0:3334')
# Then do the usual things
# ...
return
'''
__all__ = ('TuioMotionEventProvider', 'Tuio2dCurMotionEvent',
'Tuio2dObjMotionEvent')
from kivy.logger import Logger
from functools import partial
from collections import deque
from kivy.input.provider import MotionEventProvider
from kivy.input.factory import MotionEventFactory
from kivy.input.motionevent import MotionEvent
from kivy.input.shape import ShapeRect
[docs]class TuioMotionEventProvider(MotionEventProvider):
'''The TUIO provider listens to a socket and handles some of the incoming
OSC messages:
* /tuio/2Dcur
* /tuio/2Dobj
You can easily extend the provider to handle new TUIO paths like so::
# Create a class to handle the new TUIO type/path
# Replace NEWPATH with the pathname you want to handle
class TuioNEWPATHMotionEvent(MotionEvent):
def __init__(self, id, args):
super(TuioNEWPATHMotionEvent, self).__init__(id, args)
def depack(self, args):
# In this method, implement 'unpacking' for the received
# arguments. you basically translate from TUIO args to Kivy
# MotionEvent variables. If all you receive are x and y
# values, you can do it like this:
if len(args) == 2:
self.sx, self.sy = args
self.profile = ('pos', )
self.sy = 1 - self.sy
super(TuioNEWPATHMotionEvent, self).depack(args)
# Register it with the TUIO MotionEvent provider.
# You obviously need to replace the PATH placeholders appropriately.
TuioMotionEventProvider.register('/tuio/PATH', TuioNEWPATHMotionEvent)
.. note::
The class name is of no technical importance. Your class will be
associated with the path that you pass to the ``register()``
function. To keep things simple, you should name your class after the
path that it handles, though.
'''
__handlers__ = {}
def __init__(self, device, args):
super(TuioMotionEventProvider, self).__init__(device, args)
args = args.split(',')
if len(args) <= 0:
Logger.error('Tuio: Invalid configuration for TUIO provider')
Logger.error('Tuio: Format must be ip:port (eg. 127.0.0.1:3333)')
err = 'Tuio: Current configuration is <%s>' % (str(','.join(args)))
Logger.error(err)
return
ipport = args[0].split(':')
if len(ipport) != 2:
Logger.error('Tuio: Invalid configuration for TUIO provider')
Logger.error('Tuio: Format must be ip:port (eg. 127.0.0.1:3333)')
err = 'Tuio: Current configuration is <%s>' % (str(','.join(args)))
Logger.error(err)
return
self.ip, self.port = args[0].split(':')
self.port = int(self.port)
self.handlers = {}
self.oscid = None
self.tuio_event_q = deque()
self.touches = {}
[docs] @staticmethod
def register(oscpath, classname):
'''Register a new path to handle in TUIO provider'''
TuioMotionEventProvider.__handlers__[oscpath] = classname
[docs] @staticmethod
def unregister(oscpath, classname):
'''Unregister a path to stop handling it in the TUIO provider'''
if oscpath in TuioMotionEventProvider.__handlers__:
del TuioMotionEventProvider.__handlers__[oscpath]
[docs] @staticmethod
def create(oscpath, **kwargs):
'''Create a touch event from a TUIO path'''
if oscpath not in TuioMotionEventProvider.__handlers__:
raise Exception('Unknown %s touch path' % oscpath)
return TuioMotionEventProvider.__handlers__[oscpath](**kwargs)
[docs] def start(self):
'''Start the TUIO provider'''
try:
from oscpy.server import OSCThreadServer
except ImportError:
Logger.info(
'Please install the oscpy python module to use the TUIO '
'provider.'
)
raise
self.oscid = osc = OSCThreadServer()
osc.listen(self.ip, self.port, default=True)
for oscpath in TuioMotionEventProvider.__handlers__:
self.touches[oscpath] = {}
osc.bind(oscpath, partial(self._osc_tuio_cb, oscpath))
[docs] def stop(self):
'''Stop the TUIO provider'''
self.oscid.stop_all()
[docs] def update(self, dispatch_fn):
'''Update the TUIO provider (pop events from the queue)'''
# read the Queue with event
while True:
try:
value = self.tuio_event_q.pop()
except IndexError:
# queue is empty, we're done for now
return
self._update(dispatch_fn, value)
def _osc_tuio_cb(self, oscpath, address, *args):
self.tuio_event_q.appendleft([oscpath, address, args])
def _update(self, dispatch_fn, value):
oscpath, command, args = value
# verify commands
if command not in [b'alive', b'set']:
return
# move or create a new touch
if command == b'set':
id = args[0]
if id not in self.touches[oscpath]:
# new touch
touch = TuioMotionEventProvider.__handlers__[oscpath](
self.device, id, args[1:])
self.touches[oscpath][id] = touch
dispatch_fn('begin', touch)
else:
# update a current touch
touch = self.touches[oscpath][id]
touch.move(args[1:])
dispatch_fn('update', touch)
# alive event, check for deleted touch
if command == b'alive':
alives = args
to_delete = []
for id in self.touches[oscpath]:
if id not in alives:
# touch up
touch = self.touches[oscpath][id]
if touch not in to_delete:
to_delete.append(touch)
for touch in to_delete:
dispatch_fn('end', touch)
del self.touches[oscpath][touch.id]
class TuioMotionEvent(MotionEvent):
'''Abstraction for TUIO touches/fiducials.
Depending on the tracking software you use (e.g. Movid, CCV, etc.) and its
TUIO implementation, the TuioMotionEvent object can support multiple
profiles such as:
* Fiducial ID: profile name 'markerid', attribute ``.fid``
* Position: profile name 'pos', attributes ``.x``, ``.y``
* Angle: profile name 'angle', attribute ``.a``
* Velocity vector: profile name 'mov', attributes ``.X``, ``.Y``
* Rotation velocity: profile name 'rot', attribute ``.A``
* Motion acceleration: profile name 'motacc', attribute ``.m``
* Rotation acceleration: profile name 'rotacc', attribute ``.r``
'''
__attrs__ = ('a', 'b', 'c', 'X', 'Y', 'Z', 'A', 'B', 'C', 'm', 'r')
def __init__(self, device, id, args):
super(TuioMotionEvent, self).__init__(device, id, args)
# Default argument for TUIO touches
self.a = 0.0
self.b = 0.0
self.c = 0.0
self.X = 0.0
self.Y = 0.0
self.Z = 0.0
self.A = 0.0
self.B = 0.0
self.C = 0.0
self.m = 0.0
self.r = 0.0
angle = property(lambda self: self.a)
mot_accel = property(lambda self: self.m)
rot_accel = property(lambda self: self.r)
xmot = property(lambda self: self.X)
ymot = property(lambda self: self.Y)
zmot = property(lambda self: self.Z)
[docs]class Tuio2dCurMotionEvent(TuioMotionEvent):
'''A 2dCur TUIO touch.'''
def __init__(self, device, id, args):
super(Tuio2dCurMotionEvent, self).__init__(device, id, args)
[docs] def depack(self, args):
self.is_touch = True
if len(args) < 5:
self.sx, self.sy = list(map(float, args[0:2]))
self.profile = ('pos', )
elif len(args) == 5:
self.sx, self.sy, self.X, self.Y, self.m = list(map(float,
args[0:5]))
self.Y = -self.Y
self.profile = ('pos', 'mov', 'motacc')
else:
self.sx, self.sy, self.X, self.Y = list(map(float, args[0:4]))
self.m, width, height = list(map(float, args[4:7]))
self.Y = -self.Y
self.profile = ('pos', 'mov', 'motacc', 'shape')
if self.shape is None:
self.shape = ShapeRect()
self.shape.width = width
self.shape.height = height
self.sy = 1 - self.sy
super(Tuio2dCurMotionEvent, self).depack(args)
[docs]class Tuio2dObjMotionEvent(TuioMotionEvent):
'''A 2dObj TUIO object.
'''
def __init__(self, device, id, args):
super(Tuio2dObjMotionEvent, self).__init__(device, id, args)
[docs] def depack(self, args):
self.is_touch = True
if len(args) < 5:
self.sx, self.sy = args[0:2]
self.profile = ('pos', )
elif len(args) == 9:
self.fid, self.sx, self.sy, self.a, self.X, self.Y = args[:6]
self.A, self.m, self.r = args[6:9]
self.Y = -self.Y
self.profile = ('markerid', 'pos', 'angle', 'mov', 'rot',
'motacc', 'rotacc')
else:
self.fid, self.sx, self.sy, self.a, self.X, self.Y = args[:6]
self.A, self.m, self.r, width, height = args[6:11]
self.Y = -self.Y
self.profile = ('markerid', 'pos', 'angle', 'mov', 'rot', 'rotacc',
'acc', 'shape')
if self.shape is None:
self.shape = ShapeRect()
self.shape.width = width
self.shape.height = height
self.sy = 1 - self.sy
super(Tuio2dObjMotionEvent, self).depack(args)
class Tuio2dBlbMotionEvent(TuioMotionEvent):
'''A 2dBlb TUIO object.
# FIXME 3d shape are not supported
/tuio/2Dobj set s i x y a X Y A m r
/tuio/2Dblb set s x y a w h f X Y A m r
'''
def __init__(self, device, id, args):
super(Tuio2dBlbMotionEvent, self).__init__(device, id, args)
def depack(self, args):
self.is_touch = True
self.sx, self.sy, self.a, self.X, self.Y, sw, sh, sd, \
self.A, self.m, self.r = args
self.Y = -self.Y
self.profile = ('pos', 'angle', 'mov', 'rot', 'rotacc',
'acc', 'shape')
if self.shape is None:
self.shape = ShapeRect()
self.shape.width = sw
self.shape.height = sh
self.sy = 1 - self.sy
super(Tuio2dBlbMotionEvent, self).depack(args)
# registers
TuioMotionEventProvider.register(b'/tuio/2Dcur', Tuio2dCurMotionEvent)
TuioMotionEventProvider.register(b'/tuio/2Dobj', Tuio2dObjMotionEvent)
TuioMotionEventProvider.register(b'/tuio/2Dblb', Tuio2dBlbMotionEvent)
MotionEventFactory.register('tuio', TuioMotionEventProvider)
